- AUTOMATION
- SUB-STATION
- COMMUNICATION
- AIR INTAKE FILTER
- CABLE
- BUILDING MANAGEMENT SYSTEM(BMS)
DO YOU WANT TO KNOW DETAIL ABOUT OUR PRODUCTS??
INDUSTRIAL HUBS
A Hub is just a connector that connects the wires coming from different sides. There is no signal processing or regeneration. It is an electronic device that operates only on physical layers of the OSI model.
- Hub is a physical layer device i.e. layer 1.
- A Hub works on the basis of broadcasting.
- At least single network is required to connect.
- Hubs always perform frame flooding; may be unicast, multicast or broadcast
INDUSTRIAL SWITCH
Switch is a network device which is used to enable the connection establishment and connection termination on the basis of need. Switch is operated on Data link layer. In this packet filtering is available. It is type of full duplex transmission mode and it is also called efficient bridge.
- switch is operated on Data link layer of OSI Mode.
- switch can have 24 to 48 ports.
- switch is a Unicast, multicast and broadcast type transmission.
- switch is a full duplex transmission mode.